windows could not communicate with the wsd printer

1. How do I enable WSD in Windows 10?
2. What is WSD on a printer?
3. How do I connect my WSD printer?
4. How do I turn off WSD?
5. How do I activate WSD?
6. How do I scan from my Epson printer to my computer Windows 10?
7. What port should wireless printer be on?
8. How do I find the IP address of a WSD printer?
9. What port does WSD use?
10. How do I find my printer port name?
11. How does WSD work?
12. How do I remove a WSD printer port?

How do I enable WSD in Windows 10?

Web Services for Devices (WSD) allows computers to discover printers and other devices on the network. You must enable port 3702 (WS-Discovery).
...
Configure Web Services for Devices (WSD)

1. From Configure, choose Network > Services > WSD. ...
2. Select Enable WSD.
3. Choose the default print connection.
4. Apply or save your changes.

What is WSD on a printer?

Web Services for Devices or Web Services on Devices (WSD) is a Microsoft API to enable programming connections to web service enabled devices, such as printers, scanners and file shares.

How do I connect my WSD printer?

Setting Up and Connecting from Computer by WSD Port (for Windows Only)

1. Turn the printer on.
2. Click start, and then click Network on the computer.
3. Right-click the printer, and then click Install. ...
4. Click Your device is ready to use.
5. Check the message, and then click Close.
6. Open the devices and printers screen.

How do I turn off WSD?

Click on Connectivity > Setup . Click on Edit to the right of WSD (Web Services on Device). Select or deselect the WSD Enabled check box to enable or disable the option. Click Save.

How do I activate WSD?

Scanning Using Web Services for Devices (WSD) - Windows

1. Make sure you installed the product software and connected the product to your computer or network.
2. Place your original on the product for scanning.
3. Press the home button, if necessary.
4. Select Computer (WSD).
5. Select a computer.
6. Select the Start icon. The scanned image is transferred to the selected computer.

How do I scan from my Epson printer to my computer Windows 10?

Do the following:

1. Turn on your printer and make sure it is connected to your Windows 10 computer.
2. Turn on your computer.
3. Select > .
4. Select Devices > Printers & scanners > Add a printer or scanner.
5. Do one of the following: If your printer appears in the window, select it and select Add device.

What port should wireless printer be on?

For a printer connected to the computer via Parallel, the Port should be set to LPT1 (or LPT2, LPT3 if you have more than one Parallel interface port on your computer). For a printer connected to a network via a network interface (wired Ethernet or wireless), the Port should be set to EpsonNet Print Port.

How do I find the IP address of a WSD printer?

1. Open Control Panel.
2. Go to Devices and Printers.
3. Right click on the printer and click PROPERTIES at the bottom of the list (Not any of the others)
4. Click 'Web Services'
5. The IP address of the printer is under 'Webpage' which is the web portal for the printer.

What port does WSD use?

Web Services Dynamic Discovery (WS-Discovery) is a technical specification that defines a multicast discovery protocol to locate services on a local network. It operates over TCP and UDP port 3702 and uses IP multicast address 239.255.

How do I find my printer port name?

1. Click Start and then click "Control Panel."
2. Click the "View devices and printers" link in the Hardware and Sound section to view all printers connected to your computer.
3. Right-click the printer that interests you and select "Printer Properties" from the context menu to open the printer's Properties window.

How does WSD work?

WSD provides a network plug-and-play experience for Printers, Scanners and File Shares that is similar to installing a USB device. This removes the painful process of unearthing the correct device driver, the device's IP address and figuring out how to install it on the computer.

How do I remove a WSD printer port?

Go to a problem computer. Click Add Port... and select TCP/IP and enter the IP. Make that the port it uses for that printer. Then delete the WSD port (if it lets you which it doesn't always).