How to fix Razer Keyboard is not lighting up Problem

1. Fix 1: Plug your keyboard in another USB port. It's probably caused by the poor connection. ...
2. Fix 2: Uninstall and reinstall Razer Synapse. Plug your keyboard into another computer to see it light up or not. ...
3. Fix 3: Update your driver. The problem can be caused by faulty drivers.

1. Why is my Razer keyboard not lighting up?
2. How do I get my Razer keyboard to light up?
3. Why is my keyboard lighting up but not working?
4. How do I get my Razer keyboard out of demo mode?
5. How do I fix unresponsive keyboard keys?
6. How long is Razer warranty?
7. Why Does My Razer keyboard stop working?
8. How do I enable Chroma?
9. Why does Razer Synapse not open?
10. Can you accidentally lock your keyboard?
11. How do I turn my keyboard back on?
12. How do I reset my keyboard?

Why is my Razer keyboard not lighting up?

If you are experiencing this issue with your Razer keyboard or keypad, this may be caused by a faulty LED, a software, driver, or firmware issue. To resolve this, follow the steps below. Ensure that your Razer device's drivers are up to date. Make sure that your Razer Synapse software is up to date.

How do I get my Razer keyboard to light up?

Click “SYSTEM” tab on the top menu. Click on the “LIGHTING” tab. Under “BRIGHTNESS – ON BATTERY” or “BRIGHTNESS – PLUGGED IN”, you can adjust the slide bar to adjust the brightness on your keyboard.

Why is my keyboard lighting up but not working?

If the light is steady or doesn't come on at all, then the keyboard and computer aren't talking to each other. ... If your keyboard uses a USB connection, plug the keyboard into another USB port and try pressing Num Lock again. If you have another keyboard, try plugging it in and pressing Num Lock to see if it responds.

How do I get my Razer keyboard out of demo mode?

If that's the case, try to press ESC - Caps Lock - Ctrl while plugging it in and it should take it out of demo mode.

How do I fix unresponsive keyboard keys?

The simplest fix is to carefully turn the keyboard or laptop upside down and gently shake it. Usually, anything beneath the keys or inside the keyboard will shake out of the device, freeing up the keys for effective functioning once again.

How long is Razer warranty?

How long is my Limited Warranty?

Why Does My Razer keyboard stop working?

Faulty USB Connection

If your keyboard is not receiving any sort of power, try unplugging the USB connector and plugging the connector into a new USB port. This is the best way to know if your keyboard is receiving power. If this does not work, make sure you are using the correct USB connector.

How do I enable Chroma?

How to Detect a Supported Device

1. Connect the Supported third-party device.
2. Launch Synapse 3 and go to CONNECT > DEVICES.
3. The supported device will be displayed on the left side.
4. You can enable or disable the device for Chroma Connect to be able to customize the lighting settings via Synapse 3.

Why does Razer Synapse not open?

If Razer Synapse failed to start on your PC, the issue might be related to Razer device drivers. Thus, reinstalling both Razer device drivers and the Synapse software can fix the issue.

Can you accidentally lock your keyboard?

If your entire keyboard is locked, it's possible that you've turned on the Filter Keys feature accidentally. When you hold down the right SHIFT key for 8 seconds, you should hear a tone and the “Filter Keys” icon appears in the system tray. Just then, you'll find that the keyboard is locked and you can't type anything.

How do I turn my keyboard back on?

To re-enable the keyboard, simply go back to the Device Manager, right-click your keyboard again, and click "Enable" or "Install."

How do I reset my keyboard?

Reset your wired keyboard

1. Unplug the keyboard.
2. With the keyboard unplugged, hold down the ESC key.
3. While holding down the ESC key, plug the keyboard back into the computer.
4. Keep holding the ESC key until the keyboard begins to flash.
5. Unplug the keyboard again, then plug it back in.