How to fix Processor Thermal Trip Error in Windows 10 PC

1. Fix 1: Disable Overclocking. As said above the overclocking is one reason that causes overheating and the error. ...
2. Fix 2: Check Ventilating Fans. Also, make sure your computer is getting the correct amount of air for ventilation. ...
3. Fix 3: Increase the RAM. ...
4. Fix 4: Check Thermal Paste and Heat Sink.

1. What is processor thermal trip error?
2. How do I fix my computer from overheating?
3. How do I cool down my Intel NUC?
4. How much thermal paste do I put on CPU?
5. What is a thermal trip?
6. How can I cool down my PC?
7. How do you know if your PC is overheating?
8. How do I stop my CPU from overheating?
9. How do I control fans in BIOS?
10. What is normal CPU fan speed?
11. How do I control case fans in BIOS?
12. Can you use toothpaste as thermal paste?
13. Can too much thermal paste kill a CPU?
14. Can too much thermal paste be bad?

What is processor thermal trip error?

The error message 'Processor thermal trip errors' occurs after a forced shutdown of a computer when the processor becomes too hot and crosses the safe temperature threshold. ... If the processor gets 'too' hot, the kernel is forced to shut down the system.

How do I fix my computer from overheating?

Fixing cooling system problems

1. Check if the fan is working or not. ...
2. Avoid blocking the vents. ...
3. Clean up the PC. ...
4. Reapply thermal paste. ...
5. Stop overclocking. ...
6. Speed up fan speed. ...
7. Put less pressure on your PC. ...
8. Underclock CPU.

How do I cool down my Intel NUC?

Place the Intel NUC in a well-ventilated area.
...
Try different fan control settings in BIOS:

1. Press F2 during boot to enter BIOS Setup.
2. Go to Advanced > Cooling.
3. In the CPU Fan Header pane, experiment with setting Fan Control Mode to Balanced and Cool.
4. Press F10 to save and exit BIOS Setup.

How much thermal paste do I put on CPU?

Situations to Avoid:

1. Make sure to use the correct amount of thermal paste, which is roughly the size of a pea or a grain of rice. ...
2. It might be tempting to spread the thermal paste onto the CPU yourself. ...
3. Reusing paste can also cause air bubbles to form.

What is a thermal trip?

A device which is operated by a rise in temperature. It is used on circuit breakers, relays, etc., and is often a bimetallic strip which deflects when heated.

How can I cool down my PC?

Here are ten cost-effective ways to keep your system cool.

1. Keep your system away from vents and windows. ...
2. Give your system some breathing room. ...
3. Close your system's case. ...
4. Clean your fans. ...
5. Upgrade your CPU fan. ...
6. Add a case fan. ...
7. Add a memory cooling fan. ...
8. Check your system's power supply fan.

How do you know if your PC is overheating?

Symptoms of overheating

1. System boots up but shuts down automatically after a short period of time.
2. Reported CPU operating frequency is less than expected.
3. Evidence of CPU throttling.
4. General slowness of system.
5. CPU/system fan noise is excessive.

How do I stop my CPU from overheating?

Easy Methods to Prevent Your Computer from Overheating

1. Always Keep Your PC Away from the Windows or Vents. Make sure that your system is not placed near any window or vent because it can lead your PC turn warm. ...
2. Close Your System's Case. ...
3. Clean your Fans. ...
4. Upgrade Your CPU Fan. ...
5. Add Case Fan. ...
6. Add a Memory Cooling Fan. ...
7. Check Your System's Power Supply Fan.

How do I control fans in BIOS?

Follow these steps to view or change system fan control settings:

1. Press F2 during start to enter BIOS Setup.
2. Select Advanced > Cooling.
3. Fan settings are shown in the CPU Fan Header pane.
4. Press F10 to exit BIOS Setup.

What is normal CPU fan speed?

If you have the stock CPU fan, then running a fan at 70% of RPM or above will be the recommended CPU fan speed range. For gamers when their CPU temperature reaches 70C, setting RPM at 100% is the ideal CPU fan speed. At 50C to 55C the normal CPU fan speed should be around 50% of total RPM.

How do I control case fans in BIOS?

Use the arrow keys on your keyboard to scroll through the BIOS menu to the "Monitor," "Status" or other similarly named submenu (this will also vary slightly by manufacturer). Select the "Fan Speed Control" option from the submenu to open the fan controls.

Can you use toothpaste as thermal paste?

thermal paste is made of sillicon which makes contact between cpu and cooler better for a good heat transfer. ... No, toothpaste cannot replace thermal paste although it looks similar to thermal paste, toothpaste doesn't have any cooling properties as the thermal paste.

Can too much thermal paste kill a CPU?

Too much paste is unlikely to kill a modern CPU. The thermal protections in place are simply too good. But, too much paste can cause your computer to overheat and shut down. ... But, too much paste can cause your computer to overheat and shut down.

Can too much thermal paste be bad?

Putting too much paste on a socket generally won't hurt thermal performance, because the act of tightening down the cooler squeezes out the excess. Too little paste is bad, but anything above the minimum threshold will have the same effect once the cooler is tightened down.