How to fix “No Boot Device Found” on Windows 10 (Full Guide)

Press Windows Key + X and choose Command Prompt (Admin) from the menu. Write in the command prompt the following: sfc /scannow and press Enter to run it. Let the system file checker process finish and reboot the Windows 10 device. Check again for the No boot device available message.

1. How do I fix Windows 10 boot device not found?
2. How do I fix no boot device available?
3. Why does my computer say no boot device found?
4. How do I fix hard drive not detected?
5. How do I enable my hard drive in BIOS?
6. What is no boot process?
7. How do I force my computer to boot?
8. How do you fix boot failure Press any key to continue?
9. How do I fix insert boot disk and press any key?

How do I fix Windows 10 boot device not found?

Top 5 Fixes for Boot Device Not Found Windows 10/8/7

1. Hard Reset Your Computer. ...
2. Reset Hard Drive to Fix No Boot Device Found Issue. ...
3. Restore BIOS Default Settings and Modify PC Boot Order. ...
4. Check Bad Sectors on the Bootable Hard Disk. ...
5. Fix and Rebuild Damaged MBR.

How do I fix no boot device available?

To change this:

1. Restart the system.
2. Press F2 during system start to enter the System Settings.
3. Change the Boot Sequence in the Boot Settings.
4. Leave the menu via Exit in the upper right corner of the screen.

Why does my computer say no boot device found?

7 Answers. @brysonninja "no boot device found" is usually an indication of a failed hard drive or a corrupt OS. You can try and get into the BIOS of your computer by tapping away on the ESC or F10 key as soon as you power on laptop. Once you accessed the BIOS check if your computer even recognizes a HDD.

How do I fix hard drive not detected?

Step 1 – Make sure the SATA cable or USB cable is tightly connected to the internal or external drive and SATA port or the USB port on the computer. Step 2 -If that doesn't work, try another SATA or USB port on the computer's motherboard. Step 3 – Try connecting the internal or external drive to another computer.

How do I enable my hard drive in BIOS?

Restart PC and press F2 to enter BIOS; Enter Setup and check system documentation to see whether the not detected hard drive is turned Off in System Setup or not; If it's Off, turn it ON in System Setup. Reboot PC to check out and find your hard drive now.

What is no boot process?

No boot means that the computer isn't functioning as expected and, while lights can be On or Off in the motherboard, no video is display on the screen. No display can also mean no lights (LED) on the motherboard or no video is being displayed to the monitor.

How do I force my computer to boot?

Force Windows to Boot into Safe Mode

In the “System Configuration” window, switch to the “Boot” tab. Enable the “Safe Boot” check box, and then make sure the “Minimal” option below that is selected. Click the “OK” button when you're done. Windows asks if want to restart your PC now or wait until later.

How do you fix boot failure Press any key to continue?

How do I fix a boot failure?

1. Restart the PC and enter BIOS setup.
2. Locate the option for changing boot sequence.
3. Set the drive that contains the operating system as the first boot device.
4. Save the changes to BIOS utility and exit.
5. Restart your PC with the new boot order and see if the boot failure gets fixed.

How do I fix insert boot disk and press any key?

Fix: No Bootable Device — Insert Boot Disk and Press Any Key

1. Preparation.
2. Solution 1: Change the Boot Mode to UEFI.
3. Solution 2: Take Out the CMOS Battery to Reset Certain Settings.
4. Solution 3: Reset the Boot Manager via Command Prompt.