- How do I set audio output as mic input?
- How do I route audio through my mic?
- Can you plug headphones into a microphone jack?
- Can you convert audio input to output?
- How do I play music through my stereo mix mic?
- How do I play music through my VoiceMeeter mic?
How do I set audio output as mic input?
Right-click on your audio icon in the task bar and choose “Open Sound settings“. Choose “CABLE Input (VB-Audio Virtual Cable)” as Output. Choose “CABLE Output (VB-Audio Virtual Cable)” as Input. Play some music, you will see that now the sound goes to the microphone but you will not hear anything.
How do I route audio through my mic?
You can do this by going to the Control Panel option and click the "Sound" configuration. In there, switch the default device from "Microphone" to "Line-In." After this, you should be able to play sound through the mic.
Can you plug headphones into a microphone jack?
No you cannot use the microphone jack to get audio on your headphones. That will require wires on your mobo to be rewired which is not quite realistic or convenient.
Can you convert audio input to output?
no, an input can't be changed to an output. it's not wired that way inside.
How do I play music through my stereo mix mic?
Click on 'video and audio' on the left side of the settings window. You should be able to select any 'enabled' recording device under the 'microphone' menu within Paltalk's Video & Audio settings. Use the 'microphone' drop down menu to select 'stereo mix'. Now try joining some rooms.
How do I play music through my VoiceMeeter mic?
TUTORIAL: How To Play Music Through Mic (Soundboard + VoiceMeeter)
- Download and install if you haven't already: VoiceMeeter and EXP Soundboard (both of the links open in a new tab). ...
- Enable VoiceMeeter Input and Output. ...
- Open EXP Soundboard and select VoiceMeeter Input as the 1st Output.