Windows

how to repair windows xp

how to repair windows xp

To do this, follow these steps:

  1. Restart the computer in the Recovery Console. ...
  2. Type the following commands, and then press ENTER after each command: ...
  3. Insert the Windows XP installation CD into the computer's CD drive, and then restart the computer.
  4. Perform a Repair installation of Windows XP.

  1. How do I repair Windows XP without a disk?
  2. How can I repair Windows XP with command prompt?
  3. How do I fix start problems in Windows XP?
  4. Can I reinstall Windows XP without losing data?
  5. How do I boot XP into recovery mode?
  6. How do I make a Windows XP repair disk?
  7. Can ChkDsk fix bad sectors?
  8. How do I wipe my Windows XP clean?
  9. How do I boot into recovery console?
  10. How do I boot up Windows XP?
  11. How do you reboot Windows XP?
  12. How do I fix we apologize for the inconvenience Windows XP?

How do I repair Windows XP without a disk?

Restore without installation CD/DVD

  1. Turn on the computer.
  2. Press and hold the F8 key.
  3. At the Advanced Boot Options screen, choose Safe Mode with Command Prompt.
  4. Press Enter.
  5. Log in as Administrator.
  6. When Command Prompt appears, type this command: rstrui.exe.
  7. Press Enter.

How can I repair Windows XP with command prompt?

Launch System Restore from a command prompt in Windows XP

  1. Restart your computer and press [F8] during the initial startup.
  2. When you see the Windows Advanced Options Menu, select the Safe Mode with a Command Prompt option.
  3. Select the Windows XP operating system.
  4. Log on to your computer with an administrator account or with an account that has administrator credentials.

How do I fix start problems in Windows XP?

General fixes if Windows won't start

  1. Restart your computer.
  2. Press the F8 key before the Windows logo appears.
  3. At the Advanced Boot Options menu, select Last Known Good Configuration. The advanced boot options startup menu.
  4. Press Enter.

Can I reinstall Windows XP without losing data?

Reinstalling Windows XP can repair the OS, but if work-related files are stored to the system partition, all of the data will be erased during the installation process. To reload Windows XP without losing files, you can perform an in-place upgrade, also known as a repair installation.

How do I boot XP into recovery mode?

Insert the Windows XP cd in your computer. Restart your computer so you are booting off of the CD. When the Welcome to Setup screen appears, press the R button on your keyboard to start the Recovery Console. The Recovery Console will start and ask you which Windows installation you would like to log on to.

How do I make a Windows XP repair disk?

To create the bootable diskette for Windows XP, follow these steps:

  1. Boot into Windows XP.
  2. Insert the diskette in the floppy disk.
  3. Go to My Computer.
  4. Right-click on the floppy disk drive. ...
  5. Click Format.
  6. Check the Create an MS-DOS startup disk option at the Format options section.
  7. Click Start.
  8. Wait for the process to finish.

Can ChkDsk fix bad sectors?

The Check Disk utility, also known as chkdsk (since that's the command you use to run it) scans through your entire hard drive to find and fix problems. ... Chkdsk attempts to fix these problems by repairing soft bad sectors, and marking hard bad sectors so they won't be used again.

How do I wipe my Windows XP clean?

The only sure way is to do a factory reset. Create a new admin account with no password then login and delete all other user accounts in Control Panel. Use TFC and CCleaner to delete any additional temp files. Delete the Page File and disable System Restore.

How do I boot into recovery console?

Here are the steps to take for starting the Recovery Console from the F8 boot menu:

  1. Restart the computer.
  2. After the start-up message appears, press the F8 key. ...
  3. Choose the option Repair Your Computer. ...
  4. Click the Next button. ...
  5. Choose your username. ...
  6. Type your password and click OK. ...
  7. Choose the option Command Prompt.

How do I boot up Windows XP?

To boot from the Windows XP CD, insert it into the CD-ROM drive on the problem system and press [Ctrl][Alt][Delete] to reboot the computer. Once the system begins booting from the CD, simply follow the prompts that will allow the loading of the basic files needed to run Setup.

How do you reboot Windows XP?

Restart from the Windows desktop. Using the Start menu. Ctrl+Alt+Del method.
...
Windows XP and prior

  1. Click the Shut Down button.
  2. In the new window that appears, click the down arrow and select Restart from the drop-down menu.
  3. Click OK.

How do I fix we apologize for the inconvenience Windows XP?

Restart the computer. You may receive the We apologize for the inconvenience... message again.
...

  1. Restart the computer.
  2. At the first screen, press the F8 key repeatedly until Windows Advanced Options Menu appears.
  3. Use the UP or DOWN ARROW keys to select Last known good configuration.
  4. Press Enter to start Windows XP.

Windows How To Prevent Users From Changing Theme In Windows 7
How To Prevent Users From Changing Theme In Windows 7
How To Prevent Users From Changing Theme In Windows 7 Type gpedit. ... In the Policy Editor, go to User Configuration, Administrative Templates, Contr...
Desktop How To Add My Computer To Windows 8 Start Screen
How To Add My Computer To Windows 8 Start Screen
Step 1 Right-click on the Windows 8.1 taskbar, then choose Properties. Step 2 Click on the Navigation tab, then under the Start screen section, check ...
Word How To Save A File As PDF In Microsoft Office 2010
How To Save A File As PDF In Microsoft Office 2010
Save as PDF in Microsoft Office 2010 Go to File>Save As. At the bottom of the Save As dialog box, click on the down arrow for Save as type. Scroll ...