how to change default usb action android

1. Go to Settings > Developer Options.
2. Once you enter developer options. Switch to ON.
3. Scroll down to Networking. You will find Select USB configuration. Select what you want to do with your USB when connected.

1. How do I change my MTP settings on Android?
2. How do I change USB charging to transfer?
3. How do I change my USB settings on my Samsung?
4. How do I make USB tether default?
5. How do I put my Android in MTP mode?
6. How do I change my USB to MTP?
7. How do I change my USB control?
8. How do I use USB tethering without charging?
9. How do I change USB charging to transfer on Samsung?
10. How do I get my android off USB charging mode?
11. How do I reset USB on Android?
12. How do I enable USB preferences?

How do I change my MTP settings on Android?

Information

1. Navigate to 'Apps' > 'Power Tools' > 'EZ Config' > 'Generator'
2. Open DeviceConfig.xml. Expand 'DeviceConfig' > 'Other Settings' Tap 'Set USB Mode' and set to required option. MTP - Media Transfer Protocol (File transfers) PTP - Photo Transfer Protocol. Select 'Update Configure' Save.
3. Reboot the device.

How do I change USB charging to transfer?

Make sure your wire supports both charging and data. If it does then on the phone go to Settings->Storage->->3 Dots-> USB Computer Connection-> Change the mode from Charging Only to MTP or USB Mass Storage. If neither of these work then make sure you have drivers installed for your device on your computer.

How do I change my USB settings on my Samsung?

4 Select Tap for more options. 5 Under USB contolled by, select Connected device . Then under Use USB for, tap Transferring files / Android Auto. Once complete, press the back button to apply changes.

How do I make USB tether default?

With Developer Options enabled, go to the Settings app and tap Developer Options. Scroll down to the Networking section of settings and you will see the 'Select USB Configuration' option. Tap it and select the default type that you want to set. Connect your device to your PC and wait.

How do I put my Android in MTP mode?

You can follow these steps in order to do it.

1. Swipe down on your phone and find the notification about "USB options". Tap on it.
2. A page from settings will appear asking you to select the desired connection mode. Please select MTP (Media Transfer Protocol). ...
3. Wait for your phone to automatically reconnect.

How do I change my USB to MTP?

To select a USB mode for a connection

1. From the Home screen, touch and hold the Recent Apps Key (in the Touch Keys bar) > Settings > Storage > the Menu icon (at the upper-right corner of the screen) > USB PC connection.
2. Tap Media sync (MTP), Internet connection, or Camera (PTP) to connect to the PC.

How do I change my USB control?

Searching for USB in Android settings. Scroll down and tap Default USB Configuration (Figure B). The Default USB Configuration listing. In the resulting window, scroll down again and tap Default USB Configuration for a second time.

How do I use USB tethering without charging?

When you are not using your laptop/PC, use your phone. Use it until battery drains around 10%. Now connect it to your PC and turn on tethering. Use your PC to do whatever you are doing.

How do I change USB charging to transfer on Samsung?

Android file transfer for Windows

1. Unlock your phone.
2. Plug it into your computer's USB port using a cable.
3. Your Android phone will display a “Charging this device via USB” notification. ...
4. Tapping on the notification will display other options. ...
5. Your computer will show a file transfer window.

How do I get my android off USB charging mode?

Tap on the USB Debugging checkbox to enable or disable USB.
...
How to turn USB transfer on or off on Android devices

1. Press the Menu key.
2. Tap on Settings.
3. Tap on Applications.
4. Tap on Development.

How do I reset USB on Android?

Try following methods.

1. Go to Settings> Storage> More (three dots menu)> USB computer connection, choose Media device (MTP).
2. For Android 6.0, go to Settings> About phone (> Software info), tap “Build number” 7-10 times. ...
3. Dial *#0808#, if you get “USB Settings”, choose MTP+ADB, then reboot.

How do I enable USB preferences?

On the device, go to Settings > About <device>. Tap the Build number seven times to make Settings > Developer options available. Then enable the USB Debugging option. Tip: You might also want to enable the Stay awake option, to prevent your Android device from sleeping while plugged into the USB port.