Windows

Fix- PAGE_FAULT_IN_NON_PAGED_AREA BSOD error in Windows 10

Fix- PAGE_FAULT_IN_NON_PAGED_AREA BSOD error in Windows 10

Fix 'Page_fault_in_nonpaged_area' errors in Windows 10

  1. Reboot your computer from your Windows installation media.
  2. Select Repair my computer instead of Install when prompted.
  3. Select Troubleshoot, Advanced and then Startup Settings.
  4. Press F5 to enable Safe Mode with Networking.

  1. How do I fix a random BSOD?
  2. How do you fix a fault in a nonpaged area?
  3. How do I fix stop code page fault in a nonpaged area Windows 10?
  4. Can the Blue Screen of Death Be Fixed?
  5. Can bad RAM cause blue screen?
  6. How does Blue Screen of Death happen?
  7. How do I check if my RAM is faulty?
  8. How do you fix a page fault?
  9. What is a page fault error?
  10. How can I repair my Windows 10?
  11. What is NTFS Sys failure?
  12. How do I boot up in safe mode?

How do I fix a random BSOD?

If you run into issues trying any of these steps where the computer is on, try rebooting into safe mode.

  1. Check Your Memory. Many times, random BSOD errors can be a bad memory stick. ...
  2. Update Your Drivers. ...
  3. Update Your BIOS or Firmware. ...
  4. Test Other Hardware. ...
  5. Disable SATA in BIOS. ...
  6. Reset Your PC.

How do you fix a fault in a nonpaged area?

How do you fix a page fault in a nonpaged area?

  1. Test the RAM.
  2. Disable antivirus applications.
  3. Update device drivers.
  4. Disable Automatically Manage Paging File Size for All Drives.
  5. Run Windows Memory Diagnostic tool.
  6. Check disk.
  7. Run Hardware Troubleshooter.
  8. Reset this PC.

How do I fix stop code page fault in a nonpaged area Windows 10?

Right click 'This PC' in Windows Explorer and select Properties. Click 'Advanced system settings'. In the Advanced tab click Settings in the Performance box.
...
Fix Windows 10 error Page Fault In Nonpaged Area

  1. Open a CMD window as an administrator.
  2. Type or paste 'chkdsk /f /r' and hit Enter.
  3. Allow the process to complete.

Can the Blue Screen of Death Be Fixed?

If you have an application that happens to have compatibility problems with the current setup, then the Blue Screen of Death is likely at random times or every time you launch the application. Downloading and installing a new version of the app from the software support website can usually resolve it.

Can bad RAM cause blue screen?

A bad memory module (RAM) can cause unpredictable behavior in a Windows system, including the dreaded blue screen of death. If you suspect that your RAM may be faulty, you can run a memory test to confirm that you have a bad memory module.

How does Blue Screen of Death happen?

What Causes Blue Screens of Death. Blue screens are generally caused by problems with your computer's hardware or issues with its hardware driver software. ... A blue screen occurs when Windows encounters a “STOP Error.” This critical failure causes Windows to crash and stop working.

How do I check if my RAM is faulty?

How to Test RAM With Windows Memory Diagnostic Tool

  1. Search for "Windows Memory Diagnostic" in your start menu, and run the application.
  2. Select "Restart now and check for problems." ...
  3. Once restarted, wait for the result message. ...
  4. Download Passmark Memtest86. ...
  5. Double-check whether everything is correct before proceeding.

How do you fix a page fault?

5.4. 3.1. Handling of a Page Fault

  1. Check the location of the referenced page in the PMT.
  2. If a page fault occured, call on the operating system to fix it.
  3. Using the frame replacement algorithm, find the frame location.
  4. Read the data from disk to memory.
  5. Update the page map table for the process.

What is a page fault error?

A page fault occurs when a program attempts to access a block of memory that is not stored in the physical memory, or RAM. ... Some programs can handle these types of errors by finding a new memory address or relocating the data.

How can I repair my Windows 10?

How To Repair and Restore Windows 10

  1. Click Startup Repair.
  2. Click System Restore.
  3. Select your username.
  4. Type "cmd" into the main search box.
  5. Right click on Command Prompt and select Run as Administrator.
  6. Type sfc /scannow at command prompt and hit Enter.
  7. Click on the download link at the bottom of your screen.
  8. Click Accept.

What is NTFS Sys failure?

Summary: Failed NTFS. SYS is a Blue Screen of Death (BSOD) error, which may appear with the stop code - System_Service_Exception. ... SYS blue screen error on your system, it is probably because of corrupt NTFS, bad sectors on the hard drive, or incompatible device drivers.

How do I boot up in safe mode?

  1. Restart your PC. When you get to the sign-in screen, hold the Shift key down while you click Power. ...
  2. After your PC restarts to the Choose an option screen, go to Troubleshoot > Advanced options > Startup Settings > Restart.
  3. After your PC restarts, you'll see a list of options. Press 4 or F4 to start your PC in Safe Mode.

How To Import iTunes Playlists To Windows 8 Xbox Music
Launch Xbox Music and from the Home screen click or tap My Music. On the next screen select Playlists. Then right click, or on a touchscreen, swipe fr...
How To Rename Default Power Plans (Schemes) In Windows 7
How To Rename Default Power Plans (Schemes) In Windows 7 Step 1 Launch elevated Command Prompt. ... Step 2 Type Powercfg List in the Command Prompt to...
How To Always Open Links In Desktop Internet Explorer In Windows 8
Open the Programs tab. From the Choose how you open links drop-down menu, select Always in Internet Explorer on the desktop (By selecting this option,...