Fix BUGCODE_USB_DRIVER Blue Screen error in Windows 10

3 easy & effective methods to fix BUGCODE_USB_DRIVER:

1. Update your device drivers — the most successful.
2. Adjust the Power settings.
3. Install Windows update on your Windows 10.
4. Check your hard disk.

1. How do I fix the blue screen of death on Windows 10?
2. How do I get rid of blue screen error?
3. How do I turn on the blue screen troubleshooter?
4. Why does blue screen error occurs and how can we fix it?
5. Is blue screen of death bad?
6. Does factory reset fix blue screen of death?
7. Can RAM cause blue screen?
8. Why do I get blue screen error?
9. How can I repair my Windows 10?
10. Can't boot Win 10 Safe Mode?
11. How do I check my blue screen on Windows 10?
12. How do I boot up in safe mode?

How do I fix the blue screen of death on Windows 10?

Things to do first – Repair Blue Screen

1. Right-click This PC.
2. Go to Properties.
3. On the left-hand side, click Advanced System Settings.
4. Under Startup and Recovery, click Settings.
5. Now, under System Failure, untick the checkbox that says Automatically restart.
6. Click Ok to save and continue.

How do I get rid of blue screen error?

Blue screen, AKA Blue Screen of Death (BSOD) and Stop Error

1. Restart or Power cycle your computer. ...
2. Scan your computer for Malware and Viruses. ...
3. Run Microsoft Fix IT. ...
4. Check that the RAM is properly connected to the motherboard. ...
5. Faulty Hard drive. ...
6. Check if a newly installed Device causing Blue Screen of Death.

How do I turn on the blue screen troubleshooter?

To Use Blue Screen Troubleshooter in Windows 10

1. Open the Control Panel (icons view), and click/tap on the Troubleshooting icon.
2. Click/tap on the View all link at the top left in Troubleshooting. ( ...
3. Right click or press and hold on the Blue Screen troubleshooter, and click/tap on Run as administrator. (

Why does blue screen error occurs and how can we fix it?

Boot Into Safe Mode: If your computer is blue-screening every time you turn it on, try booting into safe mode. In safe mode, Windows loads only the essential drivers. ... You can work on fixing the problem from safe mode. Check for Hardware Problems: Blue screens can be caused by faulty hardware in your computer.

Is blue screen of death bad?

Although a BSoD won't damage your hardware, it can ruin your day. You're busy working or playing, and suddenly everything stops. You'll have to reboot the computer, then reload the programs and files you had open, and only after all that get back to work. And you may have to do some of that work over.

Does factory reset fix blue screen of death?

Therefore, when you factory reset your Windows PC, it only fixes a few minor issues with the driver. Any major problem such as outdated drivers is not resolved by resetting the PC. In addition, if the cause of BSOD is related to hardware, resetting PC is not going to help at all.

Can RAM cause blue screen?

A bad memory module (RAM) can cause unpredictable behavior in a Windows system, including the dreaded blue screen of death. If you suspect that your RAM may be faulty, you can run a memory test to confirm that you have a bad memory module.

Why do I get blue screen error?

BSoDs can be caused by poorly written device drivers or malfunctioning hardware, such as faulty memory, power supply issues, overheating of components, or hardware running beyond its specification limits. In the Windows 9x era, incompatible DLLs or bugs in the operating system kernel could also cause BSoDs.

How can I repair my Windows 10?

How To Repair and Restore Windows 10

1. Click Startup Repair.
2. Click System Restore.
3. Select your username.
4. Type "cmd" into the main search box.
5. Right click on Command Prompt and select Run as Administrator.
6. Type sfc /scannow at command prompt and hit Enter.
7. Click on the download link at the bottom of your screen.
8. Click Accept.

Can't boot Win 10 Safe Mode?

Here are some things that we can try when you're unable to boot into safe mode:

1. Remove any recently added hardware.
2. Restart your device and long press the Power Button to force shutdown the device when logo comes out, then you can enter Recovery Environment.

How do I check my blue screen on Windows 10?

To view Windows 10 crash logs such as the logs of blue screen error, just click on Windows Logs.

1. Then choose System under Windows Logs.
2. Find and click Error on the event list. ...
3. You can also create a custom view so you can view the crash logs more quickly. ...
4. Choose a time period you want to view. ...
5. Select the By log option.

How do I boot up in safe mode?

Starting Your Phone in Safe Mode

First, completely power off the phone. Then, power on the phone and when the Samsung logo appears, press and hold down the Volume Down key. If done correctly, "Safe Mode" will display on the bottom left corner of the screen.