How to set static IP address and DNS Server using Command Line in Windows 10

Use these steps to set a static IP address on Windows 10 using Command Prompt:

1. Open Start on Windows 10.
2. Search for Command Prompt, right-click the top result, and select the Run as administrator option.
3. Type the following command to see your current networking configuration and press Enter: ipconfig /all.

1. How do I set a static IP address in command prompt?
2. How do I setup a static IP address and change my DNS server?
3. How do I change DNS settings in CMD?
4. How do I change my IP address in Windows 10 using command prompt?
5. How do I assign a static IP address?
6. How do I set a static IP address in Windows 10?
7. What does changing your DNS to 8.8 8.8 do?
8. What DNS server should I use for static IP?
9. How do I check my DNS settings?
10. Can I use 8.8 8.8 DNS?
11. How do I change DNS settings on Windows?
12. What DNS settings should I use?

How do I set a static IP address in command prompt?

How to change IP Address from command prompt

1. Right click on start and select the command prompt (admin).
2. On User Account Control window click on “Yes” to open command prompt.
3. Type command “ipconfig” to check an IP address of your computer. ...
4. To assign an IP to our computer type “Netsh“. ...
5. Type the command “set address “Ethernet0” static 192.168.

How do I setup a static IP address and change my DNS server?

To change your DNS server, head to Settings > Wi-Fi, long-press the network you're connected to, and tap “Modify Network”. To change DNS settings, tap the “IP settings” box and change it to “Static” instead of the default DHCP. Depending on your device, you may need to check an “Advanced” box to see this setting.

How do I change DNS settings in CMD?

How to Change DNS Servers With Command Prompt

1. Open an elevated Command Prompt.
2. Type netsh and press Enter.
3. At the netsh> prompt, type interface ip show config, then press Enter.
4. Locate the network connection for which you want the DNS server changed.
5. Enter interface ip set dns "Ethernet0" static 8.8.

How do I change my IP address in Windows 10 using command prompt?

Click Start on the task bar, type cmd into the search box and press Enter. Type ipconfig /release at the prompt window, press Enter, it will release the current IP configuration. Type ipconfig /renew at the prompt window, wait for a while, the DHCP server will assign a new IP address for your computer.

How do I assign a static IP address?

You can assign these static IP addresses on the device itself—using, say, Windows' network settings on each computer—or you can do it at the router level. Doing it at the router level is called assigning a DHCP reservation, though many people (and even some routers) still refer to it as a "static IP address."

How do I set a static IP address in Windows 10?

How to assign static IP address using Settings

1. Open Settings.
2. Click on Network & Internet.
3. Click on Wi-Fi.
4. Click on the current network connection. ...
5. Under the “IP settings” section, click the Edit button. ...
6. Using the drop-down menu, select the Manual option. ...
7. Turn on the IPv4 toggle switch. ...
8. Set the static IP address.

What does changing your DNS to 8.8 8.8 do?

Originally Answered: What does changing your DNS to 8.8 do? 8.8 is a public DNS recursive operated by Google. Configuring to use that instead of your default means that your queries go to Google instead of to your ISP. You will slightly slow down your access to internet.

What DNS server should I use for static IP?

One of the most common DNS configurations when assigning a static IP address is to use one ISP-provided DNS server and one well-known public DNS service such as Google (8.8. 8.8) or Level3 (4.2. 2.1).

How do I check my DNS settings?

Android DNS Settings

To see or edit the DNS settings on your Android phone or tablet, tap the "Settings" menu on your home screen. Tap "Wi-Fi" to access your network settings, then press and hold the network you want to configure and tap "Modify Network." Tap "Show Advanced Settings" if this option appears.

Can I use 8.8 8.8 DNS?

If your DNS is only pointing to 8.8. 8.8, it will reach out externally for DNS resolution. This means it will give you internet access, but it will not resolve local DNS. It may also prevent your machines from talking to Active Directory.

How do I change DNS settings on Windows?

Windows

1. Go to the Control Panel.
2. Click Network and Internet > Network and Sharing Center > Change adapter settings.
3. Select the connection for which you want to configure Google Public DNS. ...
4. Select the Networking tab. ...
5. Click Advanced and select the DNS tab. ...
6. Click OK.
7. Select Use the following DNS server addresses.

What DNS settings should I use?

Some of the most trustworthy, high-performance DNS public resolvers and their IPv4 DNS addresses include:

• Cisco OpenDNS: 208.67. 222.222 and 208.67. 220.220;
• Cloudflare 1.1. 1.1: 1.1. 1.1 and 1.0. 0.1;
• Google Public DNS: 8.8. 8.8 and 8.8. 4.4; and.
• Quad9: 9.9. 9.9 and 149.112. 112.112.